This is an old revision of the document!
Appendix: Japanese Tools & Techniques (For Solid Modeling)
Japanese woodworking tools have evolved in a uniquely independent tradition, refined through centuries of hand craftsmanship. Unlike Western tools, they emphasize pull-stroke operation, allowing delicate, highly controlled cuts with minimal force. This same sensibility shapes the craft of solid modeling, which in Japan often uses ho-no-ki (Japanese magnolia)—a fine, even-grained native wood ideal for precise shaping and smooth finishing. Detailed descriptions of many tools and materials are available on Wikipedia, and relevant links are provided where applicable.
1. Overview & Rationale
Pull-stroke paradigm and low-force control for fine-scale work
Quiet operation and clean kerfs ideal for thin sections
Integration of traditional hand tools with modern model-making methods
2. Saws (Nokogiri)
Japanese saw
Ryoba / Dozuki / Kataba — applications, tooth pitch, replaceable blades
Controlled slitting and thin sheet cutting using pull-stroke technique
3. Planes (Kanna)
Japanese plane
Miniature kanna, dai tuning, ultra-thin shavings, and sen scraper use
Creating smooth curves, fillets, and fair surfaces on ho-no-ki
4. Chisels & Knives
Japanese chisel
Laminated chisels (uradashi/uraba) and kiridashi utility knives
Fine openings, countersinks, and pipe-seating work
Japanese chisels and carving knives maintain a balance between hardness and resilience through differential steel lamination
5. Marking & Measuring
Kebiki (single/double) marking gauges for grain-respectful scoring
Sashigane (Japanese square), and notes on JIS vs FEPA/CAMI grit systems
6. Rasps & Files
Shinto saw rasps and Japanese yasuri patterns for controlled material removal Ideal for ho-no-ki, which responds well to gentle, even abrasion
7. Sharpening & Maintenance
Waterstones (#1000/#3000/#8000), nagura use, and flattening procedures Recommended bevel angles: balsa 20–25°, ho-no-ki 25–30° Camellia oil for rust prevention and finish protection
8. Adhesives & Finishing Notes
Cyanoacrylate viscosities and historical note on hide glue Mr. Surfacer primers and two-layer tape masking practice
9. JP-Style Starter Kit
Dozuki (0.3–0.4 mm), kiridashi knife, kebiki, shinto rasp, pin vise, waterstones, diamond lapping plate, camellia oil, 3–6 mm chisels
10. Safety & Ergonomics
Stable stance for pull-cuts; safe clamping and chip control
Appendix: Quick Tables
| Material | Bevel Angle |
|---|---|
| Ho-no-ki (Japanese magnolia) | 25–30° |
| Grit (JIS) | FEPA (P) | CAMI (US) |
|---|---|---|
| #1000 | P1000 | ~600–700 |
| #3000 | P2500 | ~1200 |
| #8000 | — | ~3000–4000 |
Prepared for the Fw190-D9 (1:50) English edition. This appendix highlights the distinctive craftsmanship of Japanese woodworking culture, where the same spirit that shaped *nokogiri*, *kanna*, and *nomi* continues to inspire solid model building today.