Differences

This shows you the differences between two versions of the page.

--- en:records:he115b_reform:original_02 [2026/05/20 08:45] – ↷ Page moved from en:records:original_02 to en:records:he115b_reform:original_02 admin
+++ en:records:he115b_reform:original_02 [2026/05/23 15:52] (current) – admin
@@ Line 4: / Line 4: @@
 ===== Note =====
-This page preserves the original forum-based record in its original posting logic as closely as possible.
+This page preserves the original forum-based record as closely as possible to its original posting structure.
 The original forum entries were arranged in reverse chronological order.
 That order is retained here for archival preservation.
+The text in the highlighted boxes is based on the original forum posts by Kazu Fukuda.
+It is shown separately in order to distinguish the original source text from the explanatory and editorial text added by the archive.
 For a reconstructed chronological reading, see:
   * [[en:records:he115b_reform:start|He-115B Reform Record]]
@@ Line 18: / Line 22: @@
   * Date range of entries on this page: 2007-11-01 to 2007-11-29
   * Entry numbers included here: No.643 to No.630
+  * Original post text: Kazu Fukuda
+  * English translation and page organization: Japanese Solid Model Archive
+===== Original Record Navigation =====
+<WRAP center round box 95%>
+[[en:records:he115b_reform:start|He-115B Reform Record]]
+｜ [[en:records:he115b_reform:original_01|Original 01]]
+｜ **Original 02**
+｜ [[en:records:he115b_reform:original_03|Original 03]]
+｜ [[en:records:he115b_reform:original_04|Original 04]]
+｜ [[en:records:he115b_reform:original_05|Original 05]]
+</WRAP>
+<WRAP center>
+Previous: [[en:records:he115b_reform:original_01|Original 01 — Initial condition, dismantling, and problem recognition]]
+｜ Next: [[en:records:he115b_reform:original_03|Original 03 — Joining, surface preparation, panel lines, and trolley work]]
+</WRAP>
 ----
@@ Line 24: / Line 46: @@
 ==== Nose bombardier’s canopy ====
-{{:img200711291142311.jpg?nolink&700|Nose bombardier’s canopy}}
+{{:en:records:he115b_reform:nosecanopy.jpg?nolink&700|Nose bombardier’s canopy}}
-The upper half of the nose bombardier’s canopy has been joined.
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
+The upper half of the nose bombardier’s canopy has been joined.\\
 The remaining part is the forward rotating gun position canopy.
+</WRAP>
 ----
 ===== [2007-11-27 18:03:38] No.642 =====
-==== Installation of interior parts for the nose bombardier’s position ====
+==== Installing the interior parts of the nose bombardier’s position ====
-{{:img200711271803381.jpg?nolink&700|Installation of interior parts for the nose bombardier’s position}}
+{{:en:records:he115b_reform:nose_interior_install.jpg?nolink&700|Installing the interior parts of the nose bombardier’s position}}
-The lower canopy of the nose bombardier’s position was installed, and the interior parts were fitted.
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
+The lower canopy of the nose bombardier’s position was attached, and the interior parts were installed.\\
 Next, the upper canopy will be attached, and finally the forward rotating gun position canopy will be installed.
+</WRAP>
 ----
@@ Line 46: / Line 74: @@
 ==== Interior parts for the nose bombardier’s position ====
-{{:img200711241423281.jpg?nolink&700|Interior parts for the nose bombardier’s position}}
+{{:en:records:he115b_reform:nose_interiors.jpg?nolink&700|Interior parts for the nose bombardier’s position}}
-The parts to be installed in the nose bombardier’s position have been finished.
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
-At the far right is part of the wooden former used for heat-pressing the canopy.
+The parts to be installed in the nose bombardier’s position have been finished.\\
-After this, the various parts will be installed and the canopy will be attached.
+The part visible at the far right is part of the wooden former used to heat-press the canopy. After this, the parts will be installed and the canopy will be attached.
+</WRAP>
 ----
@@ Line 58: / Line 88: @@
 ==== Forward rotating gun position canopy and ring ====
-{{:img200711161356321.jpg?nolink&700|Forward rotating gun position canopy and ring}}
+{{:en:records:he115b_reform:rotating_gun.jpg?nolink&700|Forward rotating gun position canopy and ring}}
-This is the rotating gun position canopy fitted at the tip of the nose bombardier’s position, together with the internal rotating ring.
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
-A 7.9 mm MG 15 machine gun will be fitted at the center of the rotating gun position.
+This is the rotating gun position canopy fitted at the tip of the nose bombardier’s position, together with the rotating ring fitted inside it.\\
+A 7.9 mm MG 15 machine gun will be mounted at the center of the rotating gun position.
+</WRAP>
 ----
 ===== [2007-11-15 10:35:52] No.638 =====
-==== Trial fitting of the upper canopy ====
+==== Trial fitting of the upper fuselage canopy ====
-{{:img200711151035521.jpg?nolink&700|Trial fitting of the upper canopy}}
+{{:en:records:he115b_reform:fitting_canopy.jpg?nolink&700|Trial fitting of the upper fuselage canopy}}
-When the new upper canopy for the fuselage was trial-fitted, slight gaps appeared in some areas, so these were corrected with polyester putty.
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
-The canopy will be removed again after this.
+When the new canopy for the upper fuselage was trial-fitted, small gaps appeared in some areas, so they were corrected with polyester putty.\\
-Once painting has been completed, the interior seat parts will be installed, and the canopy will then be attached permanently.
+After this, the canopy will be removed. Once painting has been completed, the interior seat parts will be installed, and the canopy will then be attached permanently.
+</WRAP>
 ----
@@ Line 81: / Line 116: @@
 ==== Nose bombardier’s canopy ====
-{{:img200711080950421.jpg?nolink&700|Nose bombardier’s canopy}}
+{{:en:records:he115b_reform:bombardier_canopy.jpg?nolink&700|Nose bombardier’s canopy}}
-The nose bombardier’s canopy has a complex shape, and it is difficult to form it as a single piece, so it was heat-pressed in upper and lower sections.
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
-These will eventually be joined together and finished as a single canopy, so a bonding flange was attached to the upper section in advance.
+The nose bombardier’s canopy has a complex shape, and forming it in one pull would be difficult, so it was heat-pressed in upper and lower sections.\\
+The upper and lower parts will eventually be bonded together and finished as a single canopy, so a bonding flange was attached to the upper part in advance.
+</WRAP>
 ----
@@ Line 92: / Line 130: @@
 ==== Heat-pressed canopies ====
-{{:img200711080935461.jpg?nolink&700|Heat-pressed canopies}}
+{{:en:records:he115b_reform:hp_canopies.jpg?nolink&700|Heat-pressed canopies}}
-All canopies were made by heat-pressing.
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
-The window frame portions were left exposed, while the transparent parts were masked with cellophane tape.
+All of the canopies were made by heat-pressing. The transparent areas were masked with cellophane tape, leaving the window frame areas exposed.\\
+From left to right: the forward nose rotating gun position canopy, the upper nose canopy, the upper half of the bombardier’s canopy, the lower half of the bombardier’s canopy, and the upper fuselage canopy.\\
-From left to right:
+The bombardier’s canopy is difficult to form in a single pull, so it was divided into upper and lower sections.
-the forward nose gun position canopy,
+</WRAP>
-the upper nose canopy,
-the upper half of the bombardier’s canopy,
-the lower half of the bombardier’s canopy,
-and the upper fuselage canopy.
-Because the bombardier’s position canopy is difficult to form in a single pull, it was divided into upper and lower parts.
 ----
@@ Line 112: / Line 145: @@
 ==== Wooden formers for the canopies ====
-{{:img200711041038191.jpg?nolink&700|Wooden formers for the canopies}}
+{{:en:records:he115b_reform:formers_canopies.jpg?nolink&700|Wooden formers for the canopies}}
-Once the wooden former for the nose bombardier’s canopy had been completed, additional wooden formers were made for heat-pressing the hemispherical rotating gun position canopy at the nose tip, the upper nose canopy, and the upper fuselage canopy.
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
-From left to right:
+After the wooden former for the nose bombardier’s canopy was completed, additional wooden formers were made for heat-pressing the hemispherical rotating gun position canopy at the nose tip, the upper nose canopy, and the upper fuselage canopy.\\
-former for the nose tip gun position,
+From left to right: the former for the nose tip gun position, the former for the nose bombardier’s canopy, the former for the upper nose canopy, and the former for the upper fuselage canopy.
-former for the nose bombardier’s canopy,
+</WRAP>
-former for the upper nose canopy,
-and former for the upper fuselage canopy.
 ----
@@ Line 127: / Line 159: @@
 ==== Trial fitting of the nose section ====
-{{:img200711010903541.jpg?nolink&700|Trial fitting of the nose section}}
+{{:en:records:he115b_reform:fitting_nose_section.jpg?nolink&700|Trial fitting of the nose section}}
-The nose section was trial-fitted to the main body.
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
-Taking into account the thickness of the PVC sheet that will be heat-pressed, the width and height of the nose section were made slightly smaller than those of the main body.
+The nose section was trial-fitted to the main body.\\
+Taking into account the thickness of the PVC sheet to be heat-pressed, the width and height of the nose section were made smaller than those of the main body.
+</WRAP>
 ----
@@ Line 138: / Line 173: @@
 ==== Shaping the new nose section ====
-{{:img200711010856021.jpg?nolink&700|Shaping the new nose section}}
+{{:en:records:he115b_reform:new_nose_section.jpg?nolink&600|Shaping the new nose section}}
-The new nose section was shaped.
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
+The new nose section was shaped.\\
 This will also serve as the wooden former for heat-pressing the bombardier’s canopy.
+</WRAP>
 ----
@@ Line 151: / Line 189: @@
 It should be read as a preserved source layer rather than as a reconstructed analytical presentation.
 For a guided reading in chronological and interpretive form, see:
   * [[en:records:he115b_reform:start|He-115B Reform Record]]
+===== Navigation =====
+<WRAP center round box 95%>
+[[en:records:he115b_reform:start|← He-115B Reform Record]]
+｜ [[en:records:he115b_reform:original_01|← Original 01]]
+｜ **Original 02**
+｜ [[en:records:he115b_reform:original_03|Original 03 →]]
+</WRAP>
+<WRAP center small>
+Original Record Pages:
+[[en:records:he115b_reform:original_01|01]] ｜ **02** ｜ [[en:records:he115b_reform:original_03|03]] ｜ [[en:records:he115b_reform:original_04|04]] ｜ [[en:records:he115b_reform:original_05|05]]
+</WRAP>