Differences

This shows you the differences between two versions of the page.

--- en:records:he115b_reform:original_02 [2026/05/20 08:45] – removed - external edit (Unknown date) 127.0.0.1
+++ en:records:he115b_reform:original_02 [2026/05/23 15:52] (current) – admin
@@ Line 1: / Line 1: @@
+~~NOTOC~~
+====== He-115B Reform Record — Original 02 ======
+===== Note =====
+This page preserves the original forum-based record as closely as possible to its original posting structure.
+The original forum entries were arranged in reverse chronological order.
+That order is retained here for archival preservation.
+The text in the highlighted boxes is based on the original forum posts by Kazu Fukuda.
+It is shown separately in order to distinguish the original source text from the explanatory and editorial text added by the archive.
+For a reconstructed chronological reading, see:
+  * [[en:records:he115b_reform:start|He-115B Reform Record]]
+===== Source Information =====
+  * Original format: forum post archive
+  * Preserved order: reverse chronological order
+  * Date range of entries on this page: 2007-11-01 to 2007-11-29
+  * Entry numbers included here: No.643 to No.630
+  * Original post text: Kazu Fukuda
+  * English translation and page organization: Japanese Solid Model Archive
+===== Original Record Navigation =====
+<WRAP center round box 95%>
+[[en:records:he115b_reform:start|He-115B Reform Record]]
+｜ [[en:records:he115b_reform:original_01|Original 01]]
+｜ **Original 02**
+｜ [[en:records:he115b_reform:original_03|Original 03]]
+｜ [[en:records:he115b_reform:original_04|Original 04]]
+｜ [[en:records:he115b_reform:original_05|Original 05]]
+</WRAP>
+<WRAP center>
+Previous: [[en:records:he115b_reform:original_01|Original 01 — Initial condition, dismantling, and problem recognition]]
+｜ Next: [[en:records:he115b_reform:original_03|Original 03 — Joining, surface preparation, panel lines, and trolley work]]
+</WRAP>
+----
+===== [2007-11-29 11:42:31] No.643 =====
+==== Nose bombardier’s canopy ====
+{{:en:records:he115b_reform:nosecanopy.jpg?nolink&700|Nose bombardier’s canopy}}
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
+The upper half of the nose bombardier’s canopy has been joined.\\
+The remaining part is the forward rotating gun position canopy.
+</WRAP>
+----
+===== [2007-11-27 18:03:38] No.642 =====
+==== Installing the interior parts of the nose bombardier’s position ====
+{{:en:records:he115b_reform:nose_interior_install.jpg?nolink&700|Installing the interior parts of the nose bombardier’s position}}
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
+The lower canopy of the nose bombardier’s position was attached, and the interior parts were installed.\\
+Next, the upper canopy will be attached, and finally the forward rotating gun position canopy will be installed.
+</WRAP>
+----
+===== [2007-11-24 14:23:28] No.641 =====
+==== Interior parts for the nose bombardier’s position ====
+{{:en:records:he115b_reform:nose_interiors.jpg?nolink&700|Interior parts for the nose bombardier’s position}}
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
+The parts to be installed in the nose bombardier’s position have been finished.\\
+The part visible at the far right is part of the wooden former used to heat-press the canopy. After this, the parts will be installed and the canopy will be attached.
+</WRAP>
+----
+===== [2007-11-16 13:56:32] No.639 =====
+==== Forward rotating gun position canopy and ring ====
+{{:en:records:he115b_reform:rotating_gun.jpg?nolink&700|Forward rotating gun position canopy and ring}}
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
+This is the rotating gun position canopy fitted at the tip of the nose bombardier’s position, together with the rotating ring fitted inside it.\\
+A 7.9 mm MG 15 machine gun will be mounted at the center of the rotating gun position.
+</WRAP>
+----
+===== [2007-11-15 10:35:52] No.638 =====
+==== Trial fitting of the upper fuselage canopy ====
+{{:en:records:he115b_reform:fitting_canopy.jpg?nolink&700|Trial fitting of the upper fuselage canopy}}
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
+When the new canopy for the upper fuselage was trial-fitted, small gaps appeared in some areas, so they were corrected with polyester putty.\\
+After this, the canopy will be removed. Once painting has been completed, the interior seat parts will be installed, and the canopy will then be attached permanently.
+</WRAP>
+----
+===== [2007-11-08 09:50:42] No.636 =====
+==== Nose bombardier’s canopy ====
+{{:en:records:he115b_reform:bombardier_canopy.jpg?nolink&700|Nose bombardier’s canopy}}
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
+The nose bombardier’s canopy has a complex shape, and forming it in one pull would be difficult, so it was heat-pressed in upper and lower sections.\\
+The upper and lower parts will eventually be bonded together and finished as a single canopy, so a bonding flange was attached to the upper part in advance.
+</WRAP>
+----
+===== [2007-11-08 09:35:46] No.634 =====
+==== Heat-pressed canopies ====
+{{:en:records:he115b_reform:hp_canopies.jpg?nolink&700|Heat-pressed canopies}}
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
+All of the canopies were made by heat-pressing. The transparent areas were masked with cellophane tape, leaving the window frame areas exposed.\\
+From left to right: the forward nose rotating gun position canopy, the upper nose canopy, the upper half of the bombardier’s canopy, the lower half of the bombardier’s canopy, and the upper fuselage canopy.\\
+The bombardier’s canopy is difficult to form in a single pull, so it was divided into upper and lower sections.
+</WRAP>
+----
+===== [2007-11-04 10:38:19] No.633 =====
+==== Wooden formers for the canopies ====
+{{:en:records:he115b_reform:formers_canopies.jpg?nolink&700|Wooden formers for the canopies}}
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
+After the wooden former for the nose bombardier’s canopy was completed, additional wooden formers were made for heat-pressing the hemispherical rotating gun position canopy at the nose tip, the upper nose canopy, and the upper fuselage canopy.\\
+From left to right: the former for the nose tip gun position, the former for the nose bombardier’s canopy, the former for the upper nose canopy, and the former for the upper fuselage canopy.
+</WRAP>
+----
+===== [2007-11-01 09:03:54] No.632 =====
+==== Trial fitting of the nose section ====
+{{:en:records:he115b_reform:fitting_nose_section.jpg?nolink&700|Trial fitting of the nose section}}
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
+The nose section was trial-fitted to the main body.\\
+Taking into account the thickness of the PVC sheet to be heat-pressed, the width and height of the nose section were made smaller than those of the main body.
+</WRAP>
+----
+===== [2007-11-01 08:56:02] No.630 =====
+==== Shaping the new nose section ====
+{{:en:records:he115b_reform:new_nose_section.jpg?nolink&600|Shaping the new nose section}}
+<WRAP original-author-text>
+**Original post text: Kazu Fukuda / English translation**
+The new nose section was shaped.\\
+This will also serve as the wooden former for heat-pressing the bombardier’s canopy.
+</WRAP>
+----
+===== Archival Note =====
+This page preserves the original forum sequence for documentary purposes.
+It should be read as a preserved source layer rather than as a reconstructed analytical presentation.
+For a guided reading in chronological and interpretive form, see:
+  * [[en:records:he115b_reform:start|He-115B Reform Record]]
+===== Navigation =====
+<WRAP center round box 95%>
+[[en:records:he115b_reform:start|← He-115B Reform Record]]
+｜ [[en:records:he115b_reform:original_01|← Original 01]]
+｜ **Original 02**
+｜ [[en:records:he115b_reform:original_03|Original 03 →]]
+</WRAP>
+<WRAP center small>
+Original Record Pages:
+[[en:records:he115b_reform:original_01|01]] ｜ **02** ｜ [[en:records:he115b_reform:original_03|03]] ｜ [[en:records:he115b_reform:original_04|04]] ｜ [[en:records:he115b_reform:original_05|05]]
+</WRAP>